microtubing Archives - Taber Extrusions

3 04, 2022

Our Top Aluminum Microextrusion Blogs of All Time

maria2022-07-08T17:14:48+00:00April 3rd, 2022|

A lot has been said about the future of nano and microtechnology. This area of aluminum extrusion, which focuses on creating ever smaller products, promises solutions to age-old problems. On the silver screen, sci-fi productions have shown nano bots crawling into humans as a futuristic form of medicine. The Terminator film franchise explored the military potential of nano technology in a self-healing liquid metal of robots. Yet, examples like these are not actually all that farfetched. From self-healing metal to invasive medicine, a whole new realm of possibilities has been opened by tiny manufacturing.

At Taber, we are part of this revolution with our microextrusions. Like conventional aluminum extrusions, microextrusions are pushed through a die. Unlike conventional extrusions, the entire extrusion process is performed at a submillimeter level. In other words, the resulting product’s cross section can fit through a 1-millimeter square. Our microextrusions have found application in a wide range of industries, which we have previously explored in a series of articles on these miniscule creations.

1) Taber: Microextrusions for Defense and Aerospace

6 military jets flying across a blue sky above two military vehicles (tank and a ship) facing away from each other. The words “Taber: Microextrusions for Defense and Aerospace” are in black above the ship.

Taber Extrusions has experienced many evolutions since its founding in the early 1970s. Taber pioneered a process for extruding rectangular billet of solid profiles up to 31 inches wide or hollows up to 29 inches. Since then, it increased Taber’s billet capacity, alloy range, and ability to reuse materials. Within the last decade, fabrication capabilities were upgraded, friction stir welding was added, and of course, microextrusions became an offering. Lightweight, strong, and widely functional, microextrusions are perfect for military and aerospace components. Interior aircraft systems, AC condensers, communication systems, and firearm components all use microextrusions. Read more about it here.

2) Process, Benefits, and Examples of Medical Microextrusions

A darkened photograph of a medical room with a bunch of white medical appliances. The words, “Process, Benefits, and Examples of Medical Microextrusions” are positioned on top of the photo in white.

You don’t have to go in for a colonoscopy to understand the benefit of smaller medical tools. The microextrusions used in medicine include components that overwhelmingly support cardio- and neurovascular procedures, drug delivery, IV procedures, and other procedures that require work on a micro level. An added challenge for medical manufacturing is that conventional extrusion machinery is not quite precise enough, so it calls for special machinery. Medical microextrusions are created at a very slow rate to maintain the physical properties of the delicate material and create ultra-precise extrusions.

3) Microextrusions in the Consumer Electronics Sector

A lengthwise photograph of an open computer motherboard with all the different ports and circuits exposed, many of which are made of aluminum microextrusions. In the center of the photo are the words, “Microextrusions in the Consumer Electronics Sector” in white text.

The most widespread and easy-to-spot place where miniature extrusions are making a difference in consumer products is in electronic products. Portable, durable, and complex, computational devises like laptops and smartphones have increasingly smaller parts. From enclosures to motherboards and LED profile bays, microextrusions have become a fundamental part of electronic devices. This article outlines more aspects of consumer electronics that use precision aluminum extrusions in their design.

4) Aluminum Microtubing Rapidly Developing in Sync: Microextrusions

Often used in medical and surgical procedures, microtubing is a highly-valued type of microextrusion. Aluminum can provide three times as much volume per pound as other metal products – so when too much weight is detrimental, aluminum is an obvious choice. Aluminum is also anti-corrosive, making it an ideal material for many types of environments.

A metal ruler lying flat on the surface of a table showing a length of 8 inches, while several aluminum microtubes are suspended above the ruler and the words “Aluminum Microtubing Rapidly Developing in Sync: Microextrusions” are in black above the ruler and on top of the tubes.

5) From Friction Stir Welding to Micro Extrusions: Leading Aluminum Extruder Taber is Vertically Integrated

This last blog outlines Taber’s capabilities, ranging from friction stir welding to microextrusions. Through Taber’s unwavering commitment, present and future customers can expect expanded extrusion solutions, programs, and services in the coming years… and find endless possibilities. Read more about it here.

Despite its broad application in today’s products, the potential of microextrusions is still just being explored. As miniature aluminum extrusions become smaller and more precise, industries will continue to find new ways to create futuristic solutions to modern problems. Taber offers the highest levels of quality and the broadest range of capabilities in the industry, designed to be ready for whatever design tomorrow brings.

Taber Extrusions: Summary

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet, enabling the company to extrude extra-large aluminum extrusion profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS, in 1995, which houses a state-of-the-art cast house and two additional presses, micro-extrusion capabilities, and the fabrication area has been expanded multiple times.

Taber continues to extrude billet in a wide range of alloys and sizes and has diversified its markets beyond the military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. With in-house casting solutions, ultra-precision extrusion manufacturing, friction stir welding capacities, and a full range of hard and soft aluminum alloys, Taber continues to align itself as an industry leader in having the broadest available capabilities.

Today, Taber Extrusions is proud of its recently added VF-12 CNC machining line and a complete offering of extruded aluminum components, value-added machining services, and raw material supply to the North American market. Adding these capabilities to a growing portfolio propels Taber into the future in a quest to continuously improve the quality and service we provide to our customers.

Thank you for your continued support of Taber Extrusions, LLC. If you have any questions, please visit taberextrusions.com or contact one of Taber’s regional sales managers.

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/taberextrusions/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

1 03, 2021

Taber: Microextrusions For Defense and Aerospace

Catheryn2021-03-01T20:55:09+00:00March 1st, 2021|

Two images side-by-side, on left: long-range radar antenna used to track space objects and ballistic missiles. On right: A military radar antenna which rotates steadily, used for aircraft detection.

Like conventional aluminum extrusions, microextrusions are pushed through a die. Unlike conventional extrusions, the entire extrusion process is performed at a submillimeter level. In other words, the resulting product’s cross section can fit through a 1-millimeter square. Since microforming was first explored in 1990, several microextrusion processes have been developed and found to be especially valuable in the defense and aerospace industries.

“Taber was originally recognized for our large shapes and now we are establishing ourselves as microextruders. Since we’ve added microextrusions, friction stir welding, and billet casting, we’re pretty much spanning the gamut of aluminum extrusion competence,” says Jason Weber, VP of Sales and Marketing at Taber Extrusions. “We were already well-versed within the defense and aerospace markets but adding miniature aluminum extrusions to our capabilities has allowed us to become a one-stop shop for our customers in those industries. Our diversification has opened the door wide for our customers.”

Three side-by-side images illustrating how strikingly small microextrusions are. Various aluminum profiles are lined up creatively next to measuring rulers.

Taber Extrusions has experienced many evolutions since its founding in the early 1970s. Established in Russellville, AR, Taber pioneered a process for extruding rectangular billet, able to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Since then, the Gulfport, MS facility was added, which increased Taber’s billet capacity, alloy range, and ability to reuse materials. Within the last decade, fabrication capabilities were upgraded, friction stir welding was added, and of course, microextrusions became an offering.

MICROEXTRUSIONS FOR DEFENSE AND AEROSPACE

For which type of end-use applications are Taber’s microextrusions being utilized?

Defense

Precision is a must for military, defense, and firearms manufacturing – requiring strength, complexity, and tight tolerances. Aluminum’s high strength-to-weight ratio makes it the ideal material for many defense product applications such as:

Communications systems
Electronics thermal management/enclosures
Guidance systems
Radar systems
Weapons systems
Firearms components and accessories

A U.S. Air Force T-38 Talon, British Royal Air Force Eurofighter Typhoon, French Air Force Dessault Rafale, and U.S. Air Force F-22 fly in formation above the clouds on a sunny day.

Aerospace

From the Wright brothers to NASA, aluminum has helped make it possible for humans to fly above the Earth onward to explore other galaxies. Aluminum’s minimal maintenance, lightweight with high strength, flexibility at low temperatures, and ability to engineer a wide range of functionality into components, makes it an obvious choice for solutions in aircraft and aerospace. For the most part, microextrusions function out of site and you’ll never know they are all around you. However, they serve a crucial role in aerospace:

Interior aircraft systems
Supplemental oxygen systems
Electrical/Communication Systems
Passenger Comfort Systems
Coolant radiators
Oil coolers
Transmission coolers
Intercoolers
AC condensers
Passenger service systems
Other fluid/gas systems

As aluminum has played an important role in the defense and aerospace applications for many years, a new generation of aluminum-lithium alloys are offering aircraft manufacturers even more savings when it comes to weight and fuel. Beyond aluminum’s high strength-to-weight ratio and excellent formability, its anticorrosive properties make it a top choice. When aluminum is exposed to air, it forms a hard microscopic oxide coating, sealing it from the environment. This tight oxide bond is a compound not found in nature, but an aluminum alloy created to provide a long-lasting protective solution. These unique properties allow microextrusion manufacturers like Taber Extrusions to furnish extremely strong, precise, and long-lasting miniature extrusions to end users in a wide range of markets.

Taber’s Miniature Extrusion Capabilities

Up to 0.8 In²cross sectional area
Special cases down to 0.075 In²
Profile circle size up to 3″
Minimum wall thickness possible to 0.010” (select cases)
Key characteristic tolerances possible ±0.001” (select cases)

: The word “microextrusions” reflects on a metal ruler up to the 4-inch mark, with 3 sizes of square hollow-shaped miniature extrusions lined up against the 1-2-inch marks.

More About Taber Extrusions:

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS, in 1995 which houses a new state-of-the-art cast house and two additional presses, microextrusion capabilities, and the fabrication area has been expanded multiple times.

Taber continues to extrude billet in a wide range of alloys and sizes and has diversified its markets beyond military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. For these markets, the company supplies cast and extruded products in a variety of soft and hard alloys.

Today, Taber Extrusions has completed the addition of in-house friction stir welding capabilities, and carries on their offering of extruded aluminum components, value-added machining services, and raw material supply to the North American market – making them a vertically integrated supplier of FSW panels and assemblies never before seen in North America.

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/8843183/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

Interested in becoming a part of the Taber Team? Submit your resume to careers@taberextrusions.com.

Become a customer today! Visit us or request a quote: https://taberextrusions.com or call us at (888) 985-5319.

18 02, 2021

Aluminum Microtubing Rapidly Developing in Sync: Microextrusions

Catheryn2021-02-18T21:00:51+00:00February 18th, 2021|

3D Rendering of a silver ruler measuring approximately 2 inches of space, with 4 tiny aluminum tubes jutting down from the top of the image, barely taking up a few millimeters on the ruler. The words “Aluminum Mictotubing” appear to the right in white.

Recent advancements in extrusion have allowed for aluminum microtubing products to be used in medicine and surgical applications. Specifically, microextrusions have allowed for OEM’s to request microtubing with dimensions previously thought impossible.

With continued advancements in several industries, aluminum microtubing has become increasingly more complex and smaller in size. New and advanced processes have placed an urgency on manufacturers to produce smaller and smaller microtubing with safer and more durable materials.

OEMs are primarily focused on miniaturizing their devices and providing new features, but reducing cost is also a large concern. Before, these OEMs relied on traditional injecting molding to complete these projects. However, with the increasing popularity of microextrusions, OEMs now have much more flexibility in cost and design.

The use of aluminum microtubing is useful in this regard. Aluminum can provide three times as much volume per pound as other metal products – so when weight is a factor, it is an obvious choice.

Aluminum’s natural corrosion resistance makes it suitable to many types of environments and its ability to transmit heat rapidly make it ideal for heat transfer processes. On top of this all, aluminum tubing is readily bent, formed, and welded.

Per Medical Design Briefs:

“From a challenge standpoint, material is a key factor… running products on a micro level requires materials to be processed at extremely low output levels, thus creating the potential for high shear and material degradation.

Unlike traditional extrusion, which processes a large amount of material quickly, microextrusion processes a small amount of material slowly to get the desired physical and performance attributes.

In addition to the benefits provided by the reduction in size, another plus is to have the ability to build in advanced steerable capabilities, enhanced with… features to aid in complex procedures. This type of structure can be produced in multilayer size, with enhanced performance in many areas. Depending on the application and device, you can modify configurations to aid the designers even further.”

TABER’S MICROEXTRUSION PROCESS

Taber’s aluminum ultra-precise extrusions are produced through a proprietary technique that delivers features, tolerances, and surface finishes previously considered to be impossible. This unique extrusion process continues to excite design engineers, offering an additional design alternative for the production of precision aluminum components. Industries most commonly using microextrusions include computer, electronics, aerospace, medical, industrial, and military.

About Taber Extrusions:

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS., in 1995 which houses a new state of the art cast house and two additional presses, micro-extrusion capabilities, and the fabrication area has been expanded multiple times.

Taber continues to extrude billet in a wide range of alloys and sizes, and has diversified its markets beyond military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. For these markets, the company supplies cast and extruded products in a variety of soft and hard alloys.

Today, Taber Extrusions has completed the addition of in-house Friction Stir Welding capabilities, and carries on their offering of extruded aluminum components, value-added machining services and raw material supply to the North American market – making them a vertically integrated supplier of FSW panels and assemblies never before seen in North America.

A SPECIAL NOTE ON VIRUSES AND BACTERIA IN RESPECT TO ALUMINUM SURFACES:

At this time of extreme health concern, specifiers must carefully consider how material choices may impact the spread of viruses, bacteria, and infectious diseases in healthcare facilities and other public spaces.

While much about the coronavirus is still under investigation, research has demonstrated significant differences in the longevity of viruses on various surfaces, and there are a variety of treatments that appear to further reduce the growth and survival of viruses and bacteria, enhancing the surface’s ability to destroy pathogens.

A major research study published in the Journal of Hospital Infection tested human coronavirus strains for longevity on various material surfaces and found that the virus lasted only two to eight hours on aluminum, but days on many other materials.

We encourage you to access the full white paper on this topic which can be found at AEC.org

An infographic consisting of icons depicting various surface materials (aluminum, surgical gloves, plastic, steel, glass, PVC, silicon rubber, ceramic, and Teflon) with the headline, “Coronavirus (HCoV) Survival Time on Various Inanimate Surface Materials”

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/8843183/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

Interested in becoming a part of the Taber Team? Submit your resume to careers@taberextrusions.com.

Become a customer today! Visit us or request a quote: https://taberextrusions.com or call us at (888) 985-5319.

4 04, 2019

Microextrusions, Aluminum Microtubing Rapidly Developing in Sync

marshall2019-03-21T22:02:46+00:00April 4th, 2019|

The use of aluminum microtubing is useful in this regard. Aluminum can provide three times as much volume per pound as other metal products – so when weight is a factor, it is an obvious choice.

Per Medical Design Briefs:

Unlike traditional extrusion, which processes a large amount of material quickly, microextrusion processes a small amount of material slowly to get the desired physical and performance attributes.

TABER’S MICROEXTRUSION PROCESS

About Taber:

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billets which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS. in 1995 which houses a casthouse and two additional presses, with a fabrication area that has been expanded multiple times. Today, Taber Extrusions is proud to announce the launch of expanded capabilities to include microextrusions and 7” billet molds.

Follow Taber Extrusions:

LINKEDIN: https://www.linkedin.com/company/taberextrusions/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions