19 10, 2026

EO 14415 and New Defense Supply Chain Rules: What Aluminum Buyers Need to Know Before January 2027

2026-10-19T22:00:24+00:00October 19th, 2026|

Navy aircraft carrier with a fighter jets at sea with the text: EO 14415 Defense Supply Chain Rules: 2027 Aluminum Buyer Guide" overlaid on top.

Key Takeaways:

 

  • EO 14415 raises the bar for defense supply chain visibility. The order directs new requirements for tracing critical supply chains from raw materials to end-use products and for vetting suppliers for financial, foreign ownership, control, influence, and manufacturing risks.
  • Aluminum buyers should review origin at the billet and raw-material level. Domestic extrusion alone does not provide complete supply chain visibility, so procurement teams should document where material originates and how it moves through each supplier tier.
  • The January 2027 timeline makes supplier qualification a current priority. Teams that may need alternative domestic sources should begin qualification, documentation, and risk assessment before new regulations take effect.

 

EO 14415 changes what defense supply chain teams need to know about the aluminum they buy. Signed July 20, 2026, Executive Order 14415 directs the Department of War (formerly the Department of Defense) to stop issuing certain sourcing waivers on January 1, 2027, and to require contractors to map critical supply chains back to raw material origin. Aluminum is not one of the order’s covered materials, but the procurement teams buying it face January 2027 deadlines of their own, and their supply chain reviews won’t stop at the materials the order names. A domestic extrusion is no longer the whole answer; buyers will need to show where the billet came from. Policy guidance is due by mid-January 2027, and teams that trace their aluminum to the source now will be ready when the rules arrive.

What EO 14415 Requires and When It Takes Effect

In short, EO 14415 does two things: it limits waivers for covered materials starting January 1, 2027, and it directs new rules requiring contractors to map critical supply chains back to raw material origin. Executive Order 14415, titled “Securing America’s Defense Supply Chains and Ensuring Domestic Acquisition of Critical Materials,” focuses on strengthening domestic and allied defense supply chains. Section 2 addresses waivers under 10 U.S.C. 4872, while Section 3 directs the Department of War to develop new critical supply chain mapping and risk-management requirements.

Beginning January 1, 2027, the order directs the Secretary of War and the Secretaries of the military departments to stop issuing certain waivers under 10 U.S.C. 4872(c)(1), subject to the exceptions established by the order. A contractor seeking an applicable waiver will need a formal mitigation plan accepted by the Secretary or a designated official. That plan must identify the non-compliant source, document efforts to obtain compliant material, explain how the non-compliant material will be removed, and establish a strict implementation timeline.

The order also makes clear that failure to qualify a domestic source does not automatically establish non-availability. Contractors must demonstrate active, adequately funded, and ongoing efforts to qualify a domestic source in the circumstances covered by the waiver provision.

Section 3 adds another major consideration for defense procurement. The Department of War must develop policy and implementation guidance requiring covered prime contractors and subcontractors to map critical supply chains from raw materials through end-use products. Proposed regulations must include an indentured Bill of Materials, supplier risk vetting, mitigation procedures, and restrictions involving unreliable foreign suppliers.

Because the regulations are still in development, separate what EO 14415 establishes now from what implementing regulations will define later. The order gives the Department of War 180 days to issue policy guidance (about January 16, 2027) and another 90 days to issue implementing regulations.

What EO 14415 Means for Defense Supply Chain Due Diligence

Aluminum procurement deserves close attention because defense supply chains can involve several layers between raw material and finished component.

A typical aluminum extrusion supply chain may include:

Raw material → billet casting → extrusion → fabrication → finished component

Aluminum extrusion process diagram: raw material, billet casting, extrusion, fabrication and finished component, with traceability records at each step.

A buyer who only verifies the extrusion facility may not have complete visibility into the material’s origin. For that reason, aluminum supply chain due diligence for defense should extend beyond the immediate supplier and establish where billet and other relevant material originated.

That does not mean EO 14415 creates a blanket foreign adversary aluminum sourcing prohibition. The current text of 10 U.S.C. 4872 defines “covered material” to include specific materials such as certain magnets, tungsten, tantalum, and molybdenum, rather than aluminum. EO 14415 also applies its waiver provisions specifically to covered materials under that statute.

Aluminum is not a specialty metal under DFARS 252.225-7009 either. That clause defines specialty metals as certain steels and nickel, cobalt, titanium, and zirconium alloys. For most aluminum buyers, EO 14415 matters through Section 3: primes are expected to flow the new mapping and supplier-vetting requirements down to every tier, including extruders.

That distinction matters. Procurement teams should not assume that every aluminum extrusion automatically falls under the same 10 U.S.C. 4872 covered-material rules. Instead, they should evaluate the specific contract, clause, material, and supply chain involved.

For additional background on the existing defense sourcing landscape, see the NDAA Section 836 and Aluminum Extrusions: What Defense Contractors Must Know.

How to Prepare Your Defense Supply Chain for EO 14415

The new defense supply chain compliance in 2027 will call for a practical review of current suppliers and documentation. Procurement teams can begin with five steps.

  1. Map your aluminum supply chain to the billet level

Start with the extrusion supplier, then work backward. Document the extrusion facility, billet supplier, billet origin, and relevant downstream processing. Where possible, maintain supporting documentation that connects the finished extrusion to its material source. This approach supports broader defense contractor supply chain mapping efforts and prepares procurement teams for the deeper traceability requirements contemplated by EO 14415.

  1. Identify sources that create compliance risk

Review current suppliers for gaps in country-of-origin documentation, supplier ownership information, manufacturing visibility, and material traceability. For contracts subject to DFARS specialty metals domestic sourcing requirements, verify that the applicable material meets the requirements of the contract clause and any applicable exceptions.

Procurement teams should also distinguish between an actual statutory sourcing restriction and a broader supply chain risk. That distinction can prevent unnecessary supplier changes while still addressing genuine compliance exposure.

  1. Begin qualifying domestic alternatives

If a current supplier cannot provide adequate material-origin documentation or presents unacceptable supply chain risk, begin evaluating alternatives now. Domestic aluminum sourcing for defense contracts can involve more than comparing price and lead time. Qualification may require documentation reviews, testing, quality approvals, production validation, and coordination across engineering and procurement. The earlier those conversations begin, the more time teams have to resolve qualification issues before the January 2027 deadline compliance reviews reach aluminum suppliers.

  1. Prepare for the indentured Bill of Materials requirement

EO 14415 directs future regulations to require an indentured Bill of Materials that traces components, parts, equipment, software, and materials back to the origin of raw materials.

That requirement changes the level of visibility expected from a defense contractor. Teams should begin organizing information by supplier tier instead of treating the direct supplier as the end of the chain. Documentation should make it easier to identify the material source, processing locations, ownership considerations, and potential manufacturing or supply risks. The order also points to DI-MGMT-82256A, the contract data item for a Supply Chain Risk Management Plan. Expect it to appear in contract data requirements lists.

  1. Document mitigation and qualification efforts

If a supply chain presents a risk that cannot be resolved immediately, document the actions being taken. EO 14415’s formal mitigation plans apply to covered-material waivers, but the same discipline works for aluminum: the order’s future regulations call for mitigation actions, tracking, corrective action plans, and timelines across critical supply chains. A procurement file that shows when an alternative was identified, when qualification began, what testing occurred, and what remains outstanding can provide substantially better visibility than a simple statement that a domestic source was unavailable.

What to Ask a Domestic Aluminum Supplier Under EO 14415

Supplier qualification should address more than whether an extrusion is manufactured inside the United States.

For defense procurement, look for a supplier that can provide clear documentation of its material sources, manufacturing locations, quality systems, and supply chain controls.

A domestic aluminum supplier should be able to explain:

  • Where its billet comes from: Domestic extrusion does not necessarily answer the question of raw material origin. A supplier with in-house domestic billet casting can document origin from the casthouse forward.
  • What documentation accompanies the material: Depending on the application, buyers may need CMTRs, heat information, mechanical test results, and country-of-origin documentation.
  • How supplier risks are managed: EO 14415 specifically identifies financial, foreign ownership, control or influence, and manufacturing and supply risks as areas for future supplier vetting.
  • What quality certifications apply: For aerospace and defense applications, certifications such as AS9100D and relevant NADCAP approvals can be important parts of supplier qualification.
  • Whether the supplier has domestic production depth: Multiple U.S. manufacturing locations can provide additional supply chain resilience when a program requires continuity.

A supplier with an established domestic manufacturing footprint can also make defense supply chain compliance in 2027 easier to document.

Taber Extrusions’ Gulfport, Mississippi facility featuring freshly cast billets, with a graphic below noting various sizes of billets reflecting their capabilities: 10”x 28”, 20”, 16”, 11”, 9”, 8”, and 7”

For more information about domestic billet production and material sourcing, see the Aluminum Casthouse capability page.

How EO 14415 Differs From Existing DFARS Requirements

One of the most important steps for procurement teams is separating EO 14415 from existing DFARS 252.225-7009 requirements.

DFARS 252.225-7009 already establishes restrictions on certain articles containing specialty metals. The current clause requires covered specialty metals to be melted or produced in the United States, its outlying areas, or a qualifying country, subject to specified exceptions.

EO 14415 takes a different approach. Rather than replacing DFARS requirements, it directs the Department of War to strengthen domestic and allied supply chain resilience, restrict certain waiver practices under 10 U.S.C. 4872, and establish broader critical supply chain mapping requirements.

That means procurement teams should not treat EO 14415 as a replacement for DFARS compliance. Instead, review the two together when evaluating a defense contract’s sourcing and documentation requirements.

The order also directs the Department of War to develop regulations addressing supplier risk, mitigation actions, and supply chain visibility. Those Department of War supply chain regulations will determine how the broader mapping requirements operate in practice.

What Buyers Should Ask Before Choosing An Aluminum Extrusion Source

Before approving an aluminum extrusion supplier for a defense application, procurement teams should ask several practical questions:

  1. Can the supplier document the origin of the billet used for my parts?
  2. Can the supplier provide material certifications and traceability documentation?
  3. Can the supplier support the DFARS and supply chain clauses in my contract?
  4. Does the supplier have visibility into its own critical upstream suppliers?
  5. Can the supplier identify relevant foreign ownership, control, or influence risks?
  6. What domestic capacity is available if the current source becomes unacceptable?
  7. How quickly can an alternative material or supplier be qualified?
  8. Can the supplier support the documentation needed for future supply chain mapping requirements?

These questions turn a broad regulatory concern into a process your team can manage. If a current supplier can’t answer them, it’s time to qualify one that can.

FAQ: EO 14415 and the Defense Aluminum Supply Chain

When should defense contractors begin qualifying a domestic aluminum source?2026-10-19T21:58:24+00:00

Defense contractors should begin qualifying a domestic aluminum source as soon as a current supply chain presents a potential compliance or resilience issue. Supplier qualification can involve technical testing, documentation, production validation, and customer approval, so waiting until regulations are finalized may leave insufficient time to address gaps before January 1, 2027, when contractors begin reviewing their supply chains against the new requirements.

What should buyers request from an aluminum supplier before qualification?2026-10-19T21:57:47+00:00

Before qualification, buyers should request documentation appropriate to the contract and application, including material certifications, traceability information, manufacturing locations, applicable quality certifications, and information needed to evaluate supply chain risks. They should also confirm which DFARS clauses apply rather than assuming that every aluminum product falls under the same sourcing rule.

Is domestic extrusion enough for defense procurement?2026-10-19T21:56:58+00:00

Domestic extrusion is not necessarily enough for defense procurement. The applicable contract requirements determine what sourcing standards apply, but buyers should also understand the origin of the material entering the extrusion process and maintain documentation that supports the required level of traceability.

How should an aluminum buyer prepare for the indentured Bill of Materials requirement?2026-10-19T21:56:22+00:00

To prepare for the indentured Bill of Materials requirement, buyers should begin connecting finished parts to their material sources. For aluminum extrusions, that can include documenting the extrusion facility, billet source, raw material origin, downstream processing, and relevant supplier relationships.

Does EO 14415 create a blanket ban on foreign aluminum?2026-10-19T21:55:40+00:00

No. EO 14415 does not create a blanket ban on foreign aluminum. Its Section 2 waiver provisions apply to covered materials under 10 U.S.C. 4872, whose statutory definition does not generally identify aluminum as a covered material. However, the order’s broader supply chain mapping and risk-management requirements can affect critical defense supply chains, so aluminum buyers should still review the sourcing requirements applicable to their specific contracts.

Strengthen Your Domestic Aluminum Supply Chain Before 2027

EO 14415 puts greater emphasis on understanding and managing the supply chains behind critical defense acquisitions. For aluminum buyers, that means looking beyond the extrusion facility and building a clearer picture of material origin, supplier relationships, documentation, and potential risks.

Taber Extrusions manufactures aluminum extrusions from domestically cast billets at facilities in Russellville, Arkansas, and Gulfport, Mississippi. With more than 50 years of domestic manufacturing experience, AS9100D certification, NADCAP approval, and recognition as a BAE Systems Gold Medallion supplier, the company can support programs where domestic material sourcing and traceability are important procurement considerations.

Taber can help your team build the traceability record EO 14415 calls for. Contact Taber Extrusions or request a quote below to discuss your part, alloy, and documentation needs

Request A Quote

    CONTACT INFORMATION

    YOUR PROJECT NEEDS

    Please specify extrusion alloy and length below

    If you have design files for extrusion or FSW please upload below

    Excepted file formats: jpg, pdf, png.

    Please specify FSW alloy class, welding type and panel dimensions below.

    Alloy*

    Welding Type*

    Select Billet Size *

    ANY CUI OR FCI DATA IS STRICTLY PROHIBITED FROM BEING UPLOADED DIRECTLY THROUGH THIS FORM. IF YOU NEED TO SHARE ANY SENSITIVE DATA PLEASE CONTACT A TABER SALES TEAM MEMBER AND THEY WILL PROVIDE A SECURE METHOD OF SHARING ANY SENSITIVE INFORMATION.

    4 07, 2026

    NDAA Section 836 and Aluminum Extrusions: What Defense Contractors Must Know

    2026-08-18T22:20:32+00:00July 4th, 2026|

    The words “NDAA Aluminum Extrusions: DEFENSE COMPLIANCE GUIDE 2027” overlaying a darkened photo of Taber’s 10,000-ton aluminum extrusion press at their Russellville facility.

    You may have heard that NDAA Section 836 requires domestic aluminum sourcing. Here’s what’s actually true.

    NDAA Section 836 directs the Department of War, formerly Department of Defense, to open a voluntary supplier registry by January 1, 2027, where suppliers attest to sourcing compliance. Two rules are confirmed in scope: specialty metals (10 U.S.C. §4863) and covered materials (10 U.S.C. §4872) and aluminum isn’t on either list. Those rules cover steel, titanium, zirconium, nickel and cobalt alloys, plus a short list of rare-earth magnets and minerals.

    However, this guide does apply to aluminum extrusion buyers and suppliers just not through the specialty-metals route. Two frameworks are confirmed and already in motion: a July 2026 executive order requiring defense primes and subcontractors, at every tier, to map their supply chains and verify material origin, and standing Buy American Act domestic-content requirements. Those are what aluminum buyers should act on now.

    If Section 836’s registry ends up accepting Buy American Act–based attestations, domestic aluminum suppliers may be able to register there directly. DoD hasn’t published that yet, so treat it as a secondary opportunity to watch, not a confirmed path.

    Defense contractors sourcing aluminum extrusions have less than six months to get their supply chain documentation in order before January 1, 2027, when NDAA Section 836‘s registry opens and the executive order’s sourcing-waiver changes take effect. For procurement teams, the risk is straightforward: if material origin can’t be verified, suppliers may not qualify for defense programs, regardless of which specific registry or rule ultimately applies

    This NDAA aluminum guide explains what Section 836 requires, how buyers should evaluate aluminum extrusion suppliers, and what steps should be taken before 2027 supplier qualification cycles begin.

    What NDAA Section 836 Requires for Aluminum Sourcing

    NDAA Section 836 opens a voluntary DoD registry for suppliers to attest sourcing compliance.

    For aluminum procurement teams, three facts matter:

    1. Aluminum extrusions aren’t classified as a specialty metal under DFARS 252.225-7009 specifically. Although aluminum alloy fits the “alloy” definition, currently that clause covers steel, titanium, zirconium, and nickel/cobalt alloys.
    2. A July 2026 executive order requires defense primes and subcontractors, at every tier, to map their supply chains and verify material origin. This is what reaches aluminum extrusion suppliers today, independent of the Section 836 registry.
    3. Contractors must be able to document compliance through traceable material records.

    This is general guidance based on publicly available federal sourcing regulations as of August 2026. Requirements are still being finalized. Speak with your legal counsel to confirm how they apply to your specific contracts. Read the DFARS specialty metals clause in full → · Read the July 2026 executive order in full →

    WHAT BUYERS NEED TO VERIFY

    REQUIREMENT

    PROCUREMENT QUESTION

    Material Origin Where was the aluminum melted and cast?
    Manufacturing Location Where was the extrusion produced?
    Traceability Can the supplier provide heat-number tracking?
    Documentation Are CMTRs available upon request?
    Supply Chain Records Is chain-of-custody documentation available?

    Failure to verify these requirements can create sourcing delays, supplier qualification issues, and contract compliance risks.

    What “Domestic” Actually Means for Aluminum Extrusions

    One of the most common sourcing mistakes involves assuming a product qualifies as domestic simply because the extrusion press is located in the United States.

    For aluminum extrusions, buyers should evaluate the entire manufacturing chain.

    Domestic Aluminum Supply Chain

    1. Billet Production: Where was the aluminum melted and cast?

    2. Extrusion Manufacturing: Where was the profile extruded?

    3. Material Verification: Can the supplier provide Certified Mill Test Reports (CMTRs)?

    4. Traceability: Can the material be tracked through production using heat numbers and production records?

    If any of these questions cannot be answered with documentation, procurement teams should investigate further before approving the supplier.

    Documentation Procurement Teams Should Request

    • Certified Mill Test Reports (CMTRs)

    • Heat number records

    • Alloy certifications

    • Mechanical property reports

    • Chain-of-custody documentation

    • Material origin verification

    The most common compliance gaps procurement teams encounter aren’t deliberate; they’re structural. An extruder operating a U.S. press may source billet from foreign mills because domestic supply is constrained or cost differences are significant. In other words, the extrusion is American-made, but the metal isn’t. In other cases, billet is re-melted or further processed domestically before extrusion, which can obscure the original cast origin and break the traceability chain even when suppliers believe they are compliant. A third scenario involves suppliers who have historically sourced domestically but cannot produce documentation to prove it: no CMTRs on file, no heat number records, no chain-of-custody paper trail. Each of these situations looks compliant on the surface until documentation is requested. By that point, qualification timelines are already compressed.

    Many buyers discover compliance gaps only after requesting documentation. Material origin is often several tiers removed from the final extrusion supplier, making early verification essential.

    What to Look for in an NDAA-Compliant Aluminum Extrusion Supplier

    NDAA Section 836 aluminum compliance is only one part of supplier qualification.

    Defense programs require suppliers that can provide compliant material, maintain traceability, and manufacture complex aluminum profiles at production scale.

    SUPPLIER QUALIFICATION CHECKLIST

    MATERIAL SOURCING

    QUALITY SYSTEMS

    ALLOY EXPERIENCE

    MANUFACTURING CAPABILITY

    SUPPLY CHAIN STABILITY

    Domestic billet sourcing AS9100D certification 7075 Large-profile extrusion capability Multiple manufacturing facilities
    Traceable material records Aerospace quality management systems 7050 Complex hollow profile capability Established domestic manufacturing history
    CMTR availability NADCAP accreditation where applicable 5083 Structural extrusion experience Experience supporting aerospace and defense programs
    Established compliance procedures Documented inspection processes 2000-series alloys Tight-tolerance production capability
    Hard-alloy processing experience

    A supplier that satisfies sourcing requirements but lacks aluminum extrusion manufacturing capability can still create program risk.

    Why Hard Alloy and Large-Profile Capability Matters for Defense Programs

    A fully qualified defense aluminum supplier must satisfy three requirements simultaneously: domestic sourcing, documented quality systems, and the manufacturing capability to produce the required alloys and profiles. Most domestic extruders meet the first requirement. Far fewer meet all three.

    Many U.S. extrusion suppliers focus on commercial 6000-series profiles used in transportation, construction, and industrial applications. Defense and aerospace programs require significantly different capabilities such as hard alloys, large cross-sections, and dimensional tolerances that commercial presses aren’t built to hold.

    COMMON ALLOY REQUIREMENTS

    ALLOY FAMILY

    TYPICAL DEFENSE USE

    7000-series High-strength structural applications
    7050 Aerospace structural components
    7075 High-strength defense applications
    5083 Marine and structural defense applications
    2000-series Aerospace and specialized defense components

    Material selection is only part of the challenge. Profile geometry frequently determines supplier eligibility.

    Defense programs may require:

    • Large structural shapes

    • Wide profiles

    • Complex multi-void hollow extrusions

    • High-strength hard-alloy components

    • Cross-sections exceeding 140 pounds per foot ( a capability held by very few domestic extruders)

    Many domestic suppliers can manufacture standard commercial profiles. Far fewer can produce large-profile hard-alloy extrusions while maintaining the quality, dimensional control, and documentation required for defense aluminum extrusion applications.

    Manufacturers like Taber Extrusions, which operates dedicated hard-alloy presses and a new 10,000-ton press platform at U.S. facilities in Arkansas and Mississippi, represent the subset of domestic extruders with both the sourcing compliance and the manufacturing capability defense programs require.

    The January 2027 Deadline: What Defense Buyers Should Do Now

    January 1, 2027 is when the confirmed requirements take effect: the executive order’s supply-chain mapping and sourcing-waiver changes begin, and DoD’s Section 836 registry opens for the suppliers it’s confirmed to cover.

    Supplier qualification commonly requires 90 to 180 days and may include:

    • NDA execution

    • Technical review

    • Sample production

    • Material testing

    • Quality audits

    • Internal approval processes

    Organizations waiting until late 2026 may face supplier bottlenecks and compressed qualification schedules.

    RECOMMENDED PROCUREMENT TIMELINE

    DATE

    ACTION

    July-August 2026 Audit current aluminum supply chain
    August-September 2026 Request CMTRs and sourcing documentation
    September-October 2026 Identify compliance gaps
    October-November 2026 Qualify alternate suppliers
    January 1, 2027 Compliance requirements take effect

    Four Actions to Take Immediately

    1. Audit Current Suppliers: Document where aluminum is melted, cast, and extruded.

    2. Request Supporting Documentation: Obtain CMTRs, material certifications, and traceability records.

    3. Identify Supply Chain Risks: Determine whether any suppliers lack sourcing visibility or compliance documentation.

    4. Begin Supplier Qualification: If gaps exist, start qualifying domestic alternatives before fourth-quarter procurement planning begins.

    FAQ: NDAA and Domestic Aluminum Extrusion Sourcing

    Does NDAA Section 836 apply to commercial off-the-shelf (COTS) aluminum parts?2026-08-18T22:29:25+00:00

    DFARS specialty-metals COTS exemptions apply to steel, titanium, zirconium, and nickel/cobalt alloys, not aluminum, which isn’t covered by that restriction in the first place. Consult your contracting officer or legal counsel on how Buy American Act and general domestic-sourcing rules apply to your specific aluminum COTS parts.

    What happens if a current supplier cannot verify NDAA compliance?2026-07-21T19:46:19+00:00

    Procurement teams that cannot verify domestic sourcing face potential contract compliance risk and may need to qualify an alternate supplier before the next order cycle. The January 2027 deadline gives teams a limited window to identify gaps and begin qualification before fourth-quarter procurement planning begins.

    How long does defense supplier qualification typically take for aluminum extrusions?2026-07-21T19:44:45+00:00

    Qualification timelines vary by program but commonly require 90 to 180 days. The process may include NDA execution, technical review, sample production, material testing, quality audits, and internal approval. Organizations beginning qualification in late 2026 risk compressed timelines ahead of the January 2027 deadline.

    What counts as a domestic aluminum extrusion supplier?2026-08-18T22:28:23+00:00

    A domestic supplier melts and casts aluminum billet within the United States and performs the extrusion process at a U.S. facility. Foreign-cast billet that’s later extruded domestically doesn’t qualify as domestic. This standard comes from Buy American Act and general DFARS domestic-sourcing rules, not the specialty-metals clause (252.225-7009), which doesn’t cover aluminum.

    What is the difference between NDAA compliance and DFARS compliance?2026-08-18T22:26:37+00:00

    NDAA sets the underlying policy; DFARS is how it shows up in individual contract clauses. For aluminum, the relevant DFARS provisions are the Buy American Act domestic-content clauses, not the specialty-metals restriction in DFARS 252.225-7009, which applies to steel, titanium, zirconium, and nickel/cobalt alloys instead.

    Does it matter where the billet was cast if the extrusion is produced in the United States?2026-07-21T19:39:41+00:00

    Yes. Buyers should verify both billet origin and manufacturing location when evaluating compliance requirements.

    What documentation proves NDAA-compliant aluminum sourcing?2026-07-21T19:38:49+00:00

    Procurement teams typically request Certified Mill Test Reports (CMTRs), heat-number traceability records, alloy certifications, and supporting chain-of-custody documentation.

    Does NDAA Section 836 apply to all aluminum in defense contracts?2026-08-18T22:23:38+00:00

    Not under what’s confirmed so far. The registry attests compliance with specialty metals and covered materials rules, and aluminum isn’t on either list. DoD hasn’t finished publishing the registry’s full eligibility criteria, so broader paths, like Buy American Act–based registration, aren’t confirmed yet. What is certain: aluminum extrusion suppliers are affected by a separate July 2026 executive order requiring supply-chain mapping and verification.

    Preparing Your Aluminum Supply Chain for 2027

    Defense procurement teams have a narrow window to verify aluminum sourcing, close documentation gaps, and qualify compliant suppliers before January 2027. Taber Extrusions has manufactured aluminum extrusions from domestically cast billets for more than 50 years, across two U.S. facilities in Russellville, Arkansas and Gulfport, Mississippi. With hard-alloy capability in 2000, 5000, and 7000-series alloys, large-profile extrusion exceeding 140 lbs./ft, and a new 10,000-ton press platform, Taber supports defense programs that require both domestic-sourcing documentation and manufacturing capability.

    Buy American Act–compliant aluminum extrusions in hard alloys and large cross-sections, from domestic billets, at two U.S. facilities. Contact Taber to discuss your specifications.

    Request A Quote

      CONTACT INFORMATION

      YOUR PROJECT NEEDS

      Please specify extrusion alloy and length below

      If you have design files for extrusion or FSW please upload below

      Excepted file formats: jpg, pdf, png.

      Please specify FSW alloy class, welding type and panel dimensions below.

      Alloy*

      Welding Type*

      Select Billet Size *

      ANY CUI OR FCI DATA IS STRICTLY PROHIBITED FROM BEING UPLOADED DIRECTLY THROUGH THIS FORM. IF YOU NEED TO SHARE ANY SENSITIVE DATA PLEASE CONTACT A TABER SALES TEAM MEMBER AND THEY WILL PROVIDE A SECURE METHOD OF SHARING ANY SENSITIVE INFORMATION.

      Go to Top