The Only Rectangular Container In North America

Do you have a super wide extrusion need? We can help. With the only rectangular container in North America, Taber is uniquely positioned to extrude super wide shapes – wider than is capable with traditional round containers. Our exclusive rectangular container allows us to supply our customers with some of the widest, most complex multi-void hollows in the industry. It’s yet another way Taber claims the title of broadest capabilities in the aluminum extrusion industry.

Advantages of Rectangular Container in 28” X 10” Size

In a rectangular container, uniform metal flow in width and thickness of wider bars and profiles, the following is achieved in contrast to round container of similar geometry:

  • The flatness can be controlled to within 75% of AA specification on wide panel, multivoid hollow profiles of up to 29” width.
  • Contour on most profiles can be controlled as per the spec without secondary operations.
  • Superior dimension control and consistency throughout the length of the extruded profile.

Request a Quote

[contact-form-7 404 "Not Found"]

Aluminum CNC Machining

Haas VF-7

The Haas VF-7 is a rugged, large-sized VMC that yields full reliability and accuracy in a large-framed machine. The VF-7 has a 40-taper cartridge spindle driven by a 30 hp vector Dual-Drive (Y-Delta) drive. The VF-7 produces either 75 ft-lb of torque at a low 1400 rpm, or 250 ft-lb at 450 rpm with the optional 2-speed gearbox — and will also run up to 8,100 rpm in 1.2 seconds for finishing aluminum.

Courtesy of Haas Automation: www.haas.co.uk

EMMEGI Satellite XT

Emmegi Satellite XT allows for efficient work-piece machining advantages in pendulum mode including multiple set-ups. The work space of our longbed machining center can be divided into two areas, granting us the ability to load and unload on one side while machining on the other side. This expedited machining process saves our customers time and money, while delivering Taber’s definitive level of quality.

OKK Horizontal Machining Center

OKK-Horizontal-Machining-Center

The HMC500 comes fully loaded with features for incredibly fast cycle times. Achieving 20% faster rapid and acceleration than our phenomenally fast HM500S machine, the HMC500 is constructed with a lightweight column featuring a rigid stepped X axis rail design. This column enables a rapid feed rate of 63 meters per minute, 2480 inches per minute, with acceleration of 1G.

Courtesy of OKK: http://okkcorp.com

Zeiss CMM

Through highly accurate scanning technologies, our Zeiss CMM has the ability to capture a fully defined 3D measurement for any of our extruded and fabricated profiles. Having this capability allows us to verify process capability and ensure that our customers receive the highest levels of quality.

On the Cutting Edge

Sign up for our news letter and keep up with the latest innovations from Taber – including technology, metallurgy, and our ever-expanding capabilities.

[wysija_form id=”1″]