3 04, 2022

Our Top Aluminum Microextrusion Blogs of All Time

2022-07-08T17:14:48+00:00April 3rd, 2022|

Blue shaded gradient over a photograph of a bridge tower and its suspension cables on the left and the U.S. flag on the right. Taber’s logo is at the very top and beneath it are the words, “The Shape of Endless Possibilities.” The logos designating minority-owned business enterprise (ISO 9001, AS 9100, NADCAP, and ABS-certified) are across the bottom in white print.

A lot has been said about the future of nano and microtechnology. This area of aluminum extrusion, which focuses on creating ever smaller products, promises solutions to age-old problems. On the silver screen, sci-fi productions have shown nano bots crawling into humans as a futuristic form of medicine. The Terminator film franchise explored the military potential of nano technology in a self-healing liquid metal of robots. Yet, examples like these are not actually all that farfetched. From self-healing metal to invasive medicine, a whole new realm of possibilities has been opened by tiny manufacturing.

At Taber, we are part of this revolution with our microextrusions. Like conventional aluminum extrusions, microextrusions are pushed through a die. Unlike conventional extrusions, the entire extrusion process is performed at a submillimeter level. In other words, the resulting product’s cross section can fit through a 1-millimeter square. Our microextrusions have found application in a wide range of industries, which we have previously explored in a series of articles on these miniscule creations.

1) Taber: Microextrusions for Defense and Aerospace

6 military jets flying across a blue sky above two military vehicles (tank and a ship) facing away from each other. The words “Taber: Microextrusions for Defense and Aerospace” are in black above the ship.

Taber Extrusions has experienced many evolutions since its founding in the early 1970s. Taber pioneered a process for extruding rectangular billet of solid profiles up to 31 inches wide or hollows up to 29 inches. Since then, it increased Taber’s billet capacity, alloy range, and ability to reuse materials. Within the last decade, fabrication capabilities were upgraded, friction stir welding was added, and of course, microextrusions became an offering. Lightweight, strong, and widely functional, microextrusions are perfect for military and aerospace components. Interior aircraft systems, AC condensers, communication systems, and firearm components all use microextrusions. Read more about it here.

2) Process, Benefits, and Examples of Medical Microextrusions

A darkened photograph of a medical room with a bunch of white medical appliances. The words, “Process, Benefits, and Examples of Medical Microextrusions” are positioned on top of the photo in white.

You don’t have to go in for a colonoscopy to understand the benefit of smaller medical tools. The microextrusions used in medicine include components that overwhelmingly support cardio- and neurovascular procedures, drug delivery, IV procedures, and other procedures that require work on a micro level. An added challenge for medical manufacturing is that conventional extrusion machinery is not quite precise enough, so it calls for special machinery. Medical microextrusions are created at a very slow rate to maintain the physical properties of the delicate material and create ultra-precise extrusions.

3) Microextrusions in the Consumer Electronics Sector

A lengthwise photograph of an open computer motherboard with all the different ports and circuits exposed, many of which are made of aluminum microextrusions. In the center of the photo are the words, “Microextrusions in the Consumer Electronics Sector” in white text.

The most widespread and easy-to-spot place where miniature extrusions are making a difference in consumer products is in electronic products. Portable, durable, and complex, computational devises like laptops and smartphones have increasingly smaller parts. From enclosures to motherboards and LED profile bays, microextrusions have become a fundamental part of electronic devices. This article outlines more aspects of consumer electronics that use precision aluminum extrusions in their design.

Often used in medical and surgical procedures, microtubing is a highly-valued type of microextrusion. Aluminum can provide three times as much volume per pound as other metal products – so when too much weight is detrimental, aluminum is an obvious choice. Aluminum is also anti-corrosive, making it an ideal material for many types of environments.

A metal ruler lying flat on the surface of a table showing a length of 8 inches, while several aluminum microtubes are suspended above the ruler and the words “Aluminum Microtubing Rapidly Developing in Sync: Microextrusions” are in black above the ruler and on top of the tubes.
Blue shaded gradient over a photograph of a bridge tower and its suspension cables on the left and the U.S. flag on the right. Taber’s logo is at the very top and beneath it are the words, “The Shape of Endless Possibilities.” The logos designating minority-owned business enterprise (ISO 9001, AS 9100, NADCAP, and ABS-certified) are across the bottom in white print.

This last blog outlines Taber’s capabilities, ranging from friction stir welding to microextrusions. Through Taber’s unwavering commitment, present and future customers can expect expanded extrusion solutions, programs, and services in the coming years… and find endless possibilities. Read more about it here.

Despite its broad application in today’s products, the potential of microextrusions is still just being explored. As miniature aluminum extrusions become smaller and more precise, industries will continue to find new ways to create futuristic solutions to modern problems. Taber offers the highest levels of quality and the broadest range of capabilities in the industry, designed to be ready for whatever design tomorrow brings.

 

Taber Extrusions: Summary

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet, enabling the company to extrude extra-large aluminum extrusion profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS, in 1995, which houses a state-of-the-art cast house and two additional presses, micro-extrusion capabilities, and the fabrication area has been expanded multiple times.

Taber continues to extrude billet in a wide range of alloys and sizes and has diversified its markets beyond the military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. With in-house casting solutions, ultra-precision extrusion manufacturing, friction stir welding capacities, and a full range of hard and soft aluminum alloys, Taber continues to align itself as an industry leader in having the broadest available capabilities.

Today, Taber Extrusions is proud of its recently added VF-12 CNC machining line and a complete offering of extruded aluminum components, value-added machining services, and raw material supply to the North American market. Adding these capabilities to a growing portfolio propels Taber into the future in a quest to continuously improve the quality and service we provide to our customers.

Thank you for your continued support of Taber Extrusions, LLC. If you have any questions, please visit taberextrusions.com or contact one of Taber’s regional sales managers.

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/taberextrusions/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

3 02, 2022

Creating The Best Aluminum Extrusions Company

2022-07-06T21:02:02+00:00February 3rd, 2022|

An aerial view of a group of workers around a table problem solving; on the table are chalk drawings of and the terms: analysis, success, ideas, vision, teamwork.

“I’ve learned that people will forget what you said, people will forget what you did, but people will never forget how you made them feel.” —Maya Angelou

Imagine that you are in the perfect work atmosphere. Chances you are happy, productive, and not rushed. You are recognized for your unique skill set. You collaborate well with your team. You are satisfied with the work that you and your teammates accomplish and proud of the product that you offer the world at large.

What makes a great company culture? Countless writings have been published about this topic, and a great number of speakers tour the globe on corporate lecture circuits to help companies establish the best work atmosphere possible. That said, this is something that we all innately understand: the characteristics required to create the best company culture include strong/positive leadership, effective communication, diversity/inclusion, recognition, goals/strategies, and teamwork. At Taber – with five decades of practice – we infuse each of these characteristics into each and every project we undertake. If we could boil the above listed characteristics into one word, it would be teamwork.

Nine varieties of aluminum alloys in different extrusion profile shapes and sizes.

Since 1973, Taber has been a leader in aluminum extrusion and aluminum fabrication services. Taber Extrusions values our relationships, and this starts within the company and extends to our customers. As a company that specializes in aluminum extrusions, billet casting, fabrication, microextrusions, friction stir-welding, and design assistance… we do a lot of different things at Taber, so we must hire candidates from a variety of educational backgrounds and experience.

We respect our hard-workers with experience in their respective field, but we also understand the value of listening to our employees from other backgrounds that offer a fresh approach to finding new solutions to challenges. Though we are a large company, we like to think of ourselves as a local business: we value family.

Portrait of Taber Extrusions Human Resources Manager Leslie Schreckhise

“At Taber, I am surrounded by team full of smart, innovative people who challenge me to learn more and continually improve.  This is a fascinating world with new challenges and victories every day.  I am never bored at Taber!” says Leslie Schreckhise, Human Resources Manager at Taber. “I believe that what sets us apart is our family-like culture, we all care for and support each other as family.”

We advocate for our diverse team, their wide array of contributions, and do our best to make sure they feel appreciated an recognized. There are many ways to show our gratitude, including respecting their family/personal time, and forging friendships through non-work activities and team building.

Jeffrey Bladow, Taber’s Director of Business Development has this to add; “Taber solves multi-faceted problems…. I enjoy working side by side with problem solvers and relish in the satisfaction in helping our customer’s develop the products of the future. Today’s market is demanding lighter weight, higher performing applications that Taber makes today. There is a growing market demand that Taber can supply.  I hope to further engage and create an exciting atmosphere for all of our team as we respond to the opportunity ahead of us.  I will encourage and lead a mindset of continuous improvement and a fun family atmosphere to work in.  Our society will continue to demand Taber’s unique products.  We will make the world a better and more efficient place.”

Portrait of Jeffrey Bladow, Taber Extrusions Director of Business Development

Dedication to fostering our diverse team, all of whom offer important perspectives and ideas, allows us to transmit enthusiasm into each project. This means using our collective creativity and skill set to turn any idea into a design application- be they related to aerospace, transportation, mining, military, electronics, marine, shipbuilding, R&D projects, and sporting goods. Due to the nature of our inventive team—

 

Our processing services include:

  • Billet Casting – Gulfport, MS. Facility
  • Solution Heat Treatment
  • Stretcher/Detwister – 750 ton Capacity
  • Cut-to-length
  • Custom Packaging
  • Fabrication
  • Statistical Process Control
  • Quality Assurance – Defense Contractor Approved
  • Artificial Aging Ovens

Our engineering services include:

  • SolidWorks (CAD Design)
  • Extrusion Design Assistance
  • Tolerances in ASTM, AA, ANSI, DIN, or EN standards
  • CAD Software (Auto CAD)
  • Ultrasonic Testing: Portable Immersion (115 ft tank)
  • Analysis and Testing Capabilities: Chemistry, Mechanical Property Testing, Electrical Conductivity Testing, Macroanalysis, Microanalysis, Rockwell Hardness Test, Brinell Hardness Test, Webster Hardness Test, Exfoliation Corrosion Test.

 

Our team-based philosophy doesn’t end with our employees. Customers are team members too. We specialize in personal attention, and our customer-first approach allows consumer manufacturers from around the globe trust us for their most unique, customized aluminum extrusion projects. Our inventive team is on a perpetual mission to deliver excellent products with our customers in mind.

Horizontal white and black letter blocks with the terms “customer” above “satisfaction,” vertical blue and white letter blocks with the term “loyalty.)

Taber Extrusions produces a consistently dependable product – this is how we practice loyalty to our customers – and what keeps them coming back. By ensuring that every process and procedure, from billet procurement and final shipment, fulfills all ISO9001 and AS9100 standards, Taber maintains preferred supplier ratings. Our positive reputation for quality programs enables customers to optimize end-product procurement time.

More About Taber Extrusions

Taber Extrusions is located in Russellville, AR. and Gulfport, MS., is a highly regarded provider of aluminum extrusions to a wide variety of industries including aerospace, infrastructure, transportation, defense, and thermal management. ISO 9001 and AS 9100 certified, Taber’s present and future customers can expect to see increased supply opportunities with the expanded set of extrusion solutions, programs, and services.

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS in 1995 which houses a new state of the art cast house and two additional presses, micro-extrusion capabilities, and the fabrication area has been expanded multiple times. Taber continues to extrude billet in a wide range of alloys and sizes and has diversified its markets beyond military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. For these markets, the company supplies cast and extruded products in a variety of soft and hard alloys. Today, Taber Extrusions is proud of its friction stir welding capabilities, and full offering of extruded aluminum components, value-added machining services and raw material supply to the North American market.

Thank you for your continued support of Taber Extrusions, LLC. If you have any questions please visit taberextrusions.com or contact one of our Regional Sales Representatives.

Follow Taber Extrusions:

LINKEDIN: https://www.linkedin.com/company/taberextrusions/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

1 03, 2021

Taber: Microextrusions For Defense and Aerospace

2021-03-01T20:55:09+00:00March 1st, 2021|

Two images side-by-side, on left: long-range radar antenna used to track space objects and ballistic missiles. On right: A military radar antenna which rotates steadily, used for aircraft detection.

Like conventional aluminum extrusions, microextrusions are pushed through a die. Unlike conventional extrusions, the entire extrusion process is performed at a submillimeter level. In other words, the resulting product’s cross section can fit through a 1-millimeter square. Since microforming was first explored in 1990, several microextrusion processes have been developed and found to be especially valuable in the defense and aerospace industries.

“Taber was originally recognized for our large shapes and now we are establishing ourselves as microextruders. Since we’ve added microextrusions, friction stir welding, and billet casting, we’re pretty much spanning the gamut of aluminum extrusion competence,” says Jason Weber, VP of Sales and Marketing at Taber Extrusions. “We were already well-versed within the defense and aerospace markets but adding miniature aluminum extrusions to our capabilities has allowed us to become a one-stop shop for our customers in those industries. Our diversification has opened the door wide for our customers.”

Three side-by-side images illustrating how strikingly small microextrusions are. Various aluminum profiles are lined up creatively next to measuring rulers.

Taber Extrusions has experienced many evolutions since its founding in the early 1970s. Established in Russellville, AR, Taber pioneered a process for extruding rectangular billet, able to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Since then, the Gulfport, MS facility was added, which increased Taber’s billet capacity, alloy range, and ability to reuse materials. Within the last decade, fabrication capabilities were upgraded, friction stir welding was added, and of course, microextrusions became an offering.

MICROEXTRUSIONS FOR DEFENSE AND AEROSPACE

For which type of end-use applications are Taber’s microextrusions being utilized?

 

Defense

 

Precision is a must for military, defense, and firearms manufacturing – requiring strength, complexity, and tight tolerances. Aluminum’s high strength-to-weight ratio makes it the ideal material for many defense product applications such as:

 

  • Communications systems
  • Electronics thermal management/enclosures
  • Guidance systems
  • Radar systems
  • Weapons systems
  • Firearms components and accessories
A U.S. Air Force T-38 Talon, British Royal Air Force Eurofighter Typhoon, French Air Force Dessault Rafale, and U.S. Air Force F-22 fly in formation above the clouds on a sunny day.

Aerospace

 

From the Wright brothers to NASA, aluminum has helped make it possible for humans to fly above the Earth onward to explore other galaxies. Aluminum’s minimal maintenance, lightweight with high strength, flexibility at low temperatures, and ability to engineer a wide range of functionality into components, makes it an obvious choice for solutions in aircraft and aerospace.  For the most part, microextrusions function out of site and you’ll never know they are all around you. However, they serve a crucial role in aerospace:

 

  • Interior aircraft systems
  • Supplemental oxygen systems
  • Electrical/Communication Systems
  • Passenger Comfort Systems
  • Coolant radiators
  • Oil coolers
  • Transmission coolers
  • Intercoolers
  • AC condensers
  • Passenger service systems
  • Other fluid/gas systems

As aluminum has played an important role in the defense and aerospace applications for many years, a new generation of aluminum-lithium alloys are offering aircraft manufacturers even more savings when it comes to weight and fuel. Beyond aluminum’s high strength-to-weight ratio and excellent formability, its anticorrosive properties make it a top choice. When aluminum is exposed to air, it forms a hard microscopic oxide coating, sealing it from the environment. This tight oxide bond is a compound not found in nature, but an aluminum alloy created to provide a long-lasting protective solution. These unique properties allow microextrusion manufacturers like Taber Extrusions to furnish extremely strong, precise, and long-lasting miniature extrusions to end users in a wide range of markets.

Taber’s Miniature Extrusion Capabilities

  • Up to 0.8 In2 cross sectional area
  • Special cases down to 0.075 In2
  • Profile circle size up to 3″
  • Minimum wall thickness possible to 0.010” (select cases)
  • Key characteristic tolerances possible ±0.001” (select cases)
: The word “microextrusions” reflects on a metal ruler up to the 4-inch mark, with 3 sizes of square hollow-shaped miniature extrusions lined up against the 1-2-inch marks.

More About Taber Extrusions: 

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS, in 1995 which houses a new state-of-the-art cast house and two additional presses, microextrusion capabilities, and the fabrication area has been expanded multiple times.

Taber continues to extrude billet in a wide range of alloys and sizes and has diversified its markets beyond military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. For these markets, the company supplies cast and extruded products in a variety of soft and hard alloys.

Today, Taber Extrusions has completed the addition of in-house friction stir welding capabilities, and carries on their offering of extruded aluminum components, value-added machining services, and raw material supply to the North American market – making them a vertically integrated supplier of FSW panels and assemblies never before seen in North America.

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/8843183/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

Interested in becoming a part of the Taber Team?  Submit your resume to careers@taberextrusions.com.

Become a customer today! Visit us or request a quote: https://taberextrusions.com or call us at (888) 985-5319.

18 02, 2021

Aluminum Microtubing Rapidly Developing in Sync: Microextrusions

2021-02-18T21:00:51+00:00February 18th, 2021|

3D Rendering of a silver ruler measuring approximately 2 inches of space, with 4 tiny aluminum tubes jutting down from the top of the image, barely taking up a few millimeters on the ruler. The words “Aluminum Mictotubing” appear to the right in white.

Recent advancements in extrusion have allowed for aluminum microtubing products to be used in medicine and surgical applications. Specifically, microextrusions have allowed for OEM’s to request microtubing with dimensions previously thought impossible.

With continued advancements in several industries, aluminum microtubing has become increasingly more complex and smaller in size. New and advanced processes have placed an urgency on manufacturers to produce smaller and smaller microtubing with safer and more durable materials.

OEMs are primarily focused on miniaturizing their devices and providing new features, but reducing cost is also a large concern. Before, these OEMs relied on traditional injecting molding to complete these projects. However, with the increasing popularity of microextrusions, OEMs now have much more flexibility in cost and design.

The use of aluminum microtubing is useful in this regard. Aluminum can provide three times as much volume per pound as other metal products – so when weight is a factor, it is an obvious choice.

Aluminum’s natural corrosion resistance makes it suitable to many types of environments and its ability to transmit heat rapidly make it ideal for heat transfer processes. On top of this all, aluminum tubing is readily bent, formed, and welded.

Per Medical Design Briefs:

“From a challenge standpoint, material is a key factor… running products on a micro level requires materials to be processed at extremely low output levels, thus creating the potential for high shear and material degradation.

Unlike traditional extrusion, which processes a large amount of material quickly, microextrusion processes a small amount of material slowly to get the desired physical and performance attributes.

In addition to the benefits provided by the reduction in size, another plus is to have the ability to build in advanced steerable capabilities, enhanced with… features to aid in complex procedures. This type of structure can be produced in multilayer size, with enhanced performance in many areas. Depending on the application and device, you can modify configurations to aid the designers even further.”

TABER’S MICROEXTRUSION PROCESS

Taber’s aluminum ultra-precise extrusions are produced through a proprietary technique that delivers features, tolerances, and surface finishes previously considered to be impossible. This unique extrusion process continues to excite design engineers, offering an additional design alternative for the production of precision aluminum components. Industries most commonly using microextrusions include computer, electronics, aerospace, medical, industrial, and military.

About Taber Extrusions: 

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS., in 1995 which houses a new state of the art cast house and two additional presses, micro-extrusion capabilities, and the fabrication area has been expanded multiple times.

Taber continues to extrude billet in a wide range of alloys and sizes, and has diversified its markets beyond military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. For these markets, the company supplies cast and extruded products in a variety of soft and hard alloys.

Today, Taber Extrusions has completed the addition of in-house Friction Stir Welding capabilities, and carries on their offering of extruded aluminum components, value-added machining services and raw material supply to the North American market – making them a vertically integrated supplier of FSW panels and assemblies never before seen in North America.

A SPECIAL NOTE ON VIRUSES AND BACTERIA IN RESPECT TO ALUMINUM SURFACES:

 

At this time of extreme health concern, specifiers must carefully consider how material choices may impact the spread of viruses, bacteria, and infectious diseases in healthcare facilities and other public spaces.

While much about the coronavirus is still under investigation, research has demonstrated significant differences in the longevity of viruses on various surfaces, and there are a variety of treatments that appear to further reduce the growth and survival of viruses and bacteria, enhancing the surface’s ability to destroy pathogens.

A major research study published in the Journal of Hospital Infection tested human coronavirus strains for longevity on various material surfaces and found that the virus lasted only two to eight hours on aluminum, but days on many other materials.

We encourage you to access the full white paper on this topic which can be found at AEC.org

An infographic consisting of icons depicting various surface materials (aluminum, surgical gloves, plastic, steel, glass, PVC, silicon rubber, ceramic, and Teflon) with the headline, “Coronavirus (HCoV) Survival Time on Various Inanimate Surface Materials”

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/8843183/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

Interested in becoming a part of the Taber Team?  Submit your resume to careers@taberextrusions.com.

Become a customer today! Visit us or request a quote: https://taberextrusions.com or call us at (888) 985-5319.

4 12, 2020

Process, Benefits, and Examples of Medical Microextrusions

2020-12-04T01:28:40+00:00December 4th, 2020|

A brightly lit medical office containing an MRI machine and various other high tech medical testing equipment.

A SPECIAL NOTE ON VIRUSES AND BACTERIA IN RESPECT TO ALUMINUM SURFACES:

 

At this time of extreme health concern, specifiers must carefully consider how material choices may impact the spread of viruses, bacteria and infectious diseases in healthcare facilities and other public spaces.

While much about the coronavirus is still under investigation, research has demonstrated significant differences in the longevity of viruses on various surfaces, and there are a variety of treatments that appear to further reduce the growth and survival of viruses and bacteria, enhancing the surface’s ability to destroy pathogens.

A major research study published in the Journal of Hospital Infection tested human coronavirus strains for longevity on various material surfaces and found that the virus lasted only two to eight hours on aluminum, but days on many other materials.

We encourage you to access the full white paper on this topic which can be found at AEC.org.

An infographic consisting of icons depicting various surface material (aluminum, surgical gloves, plastic, steel, glass, PVC, silicon rubber, ceramic, and Teflon.) with the headline, “Coronavirus (HCoV)) Survival Time on Various Inanimate Materials”

Medical Microextrusions: Process, Benefits, and Examples

Advancements in medical microextrusions technology in recent years have allowed manufacturers to create high quality products for the world of medical OEMs. With a range of dimensions that can reach as small as 0.024 in., OD with up to 6 lumens, and an ID range that can reach 0.003, it’s no surprise that many OEMs are turning to companies like Taber Extrusions that can provide products within these parameters. (Source: medicaldesignbriefs.com)

In fact, micro-sized medical components are quickly becoming crucial to modern hospital safety and cost-efficiency. Whether it be for micro-tubing or micro sized components, the microextrusion process provides a number of benefits to engineers, OEMs, and patients.

In the quest to create higher quality medical devices, companies are looking to enhance existing products (including catheters and precise flow restrictors) through miniaturization, while ultimately reducing the costs of production.

Medical products that utilize microextrusion technology overwhelmingly support cardio-and-neurovascular procedures, drug delivery, IV procedures, and other procedures that require work on a micro level.

By minimizing the impact of invasive procedures, the medical industry can reduce complications, make procedures faster and more efficient, and ultimately reduce patient in-time and overall healthcare costs.

Closeup angle of a bundle of medical microextrusions with a blue overlay on the photo.

WHAT’S THE MICROEXTRUSION PROCESS LIKE?

Manufacturing the miniature components used in a medical microextrusion device poses a unique challenge for microextrusion providers. These components cannot be created using conventional extrusion machinery. Instead, they require precise, state-of-the-art equipment that allows for a high degree of precision and control over the process, as well as Engineers and technicians that possess deep knowledge of both the material and the process itself.

However, at its core, the process is similar to that of regular extrusion.

The material is either pushed forward (direct) or pulled through (indirect) a die orifice to create the shape required. Unlike macro-level extrusions, microextrusions are extruded at a very slow rate to maintain the physical properties of materials that are often delicate.

Done properly, microextrusions can create end products that have complex cross sections and preserved chemical properties.

BENEFITS TO OEMs

Lower Time-to-Market

In years previous, OEM’s requests for medical products would require them to re-outfit their existing extrusion machines, which would take more time and far less efficient. With many manufacturers outfitting themselves with microextrusion machinery, the time required to create the product is drastically reduced.

Lower Costs

As stated above, microextrusions can achieve their desired performance at fractions of the cost, due to the lower cost in materials that are used. As the development of the technology continues to improve, so to do the devices that are used in tandem with them. (i.e fibre optic cable, sensors, stints, etc.)

Psychological benefit to patients

A patient’s positive mental state can be a great asset to their recovery. Waning are the days of large, invasive medical devices that can cause patients discomfort. Smaller, less intrusive devices can go a long way. (source: Medical Plastic News)

POTENTIAL APPLICATIONS

  • Infant/pediatric care
  • Heart leads
  • Neurological
  • Vascular Surgery
  • Catheters
  • Radiology
  • Urology
  • Oncology

About Taber Extrusions

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS., in 1995 which houses a new state of the art cast house and two additional presses, micro-extrusion capabilities, and the fabrication area has been expanded multiple times.

Taber continues to extrude billet in a wide range of alloys and sizes, and has diversified its markets beyond military since its inception to include aerospace, automotive, marine, infrastructure, and sporting goods, among many others. For these markets, the company supplies cast and extruded products in a variety of soft and hard alloys.

Today, Taber Extrusions has completed the addition of in-house Friction Stir Welding capabilities, and carries on their offering of extruded aluminum components, value-added machining services and raw material supply to the North American market – making them a vertically integrated supplier of FSW panels and assemblies never before seen in North America.

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/8843183/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

Interested in becoming a part of the Taber Team?  Submit your resume to careers@taberextrusions.com.

Become a customer today! Visit us or request a quote: https://taberextrusions.com or call us at (888) 985-5319.

22 06, 2018

Medical Microextrusions | Process, Benefits, and Examples

2018-06-22T22:04:25+00:00June 22nd, 2018|

medical microextrusions

Advancements in medical microextrusions technology in recent years have allowed manufacturers to create high quality products for the world of medical OEMs. With a range of dimensions that can reach as small as 0.024 in., OD with up to 6 lumens, and an ID range that can reach 0.003, it’s no surprise that many OEMs are turning to companies like Taber Extrusions that can provide products within these parameters. (Source: medicaldesignbriefs.com)

In fact, micro-sized medical components are quickly becoming crucial to modern hospital safety and cost-efficiency. Whether it be for micro-tubing or micro sized components, the microextrusion process provides a number of benefits to engineers, OEMs, and patients.

In the quest to create higher quality medical devices, companies are looking to enhance existing products (including catheters and precise flow restrictors) through miniaturization, while ultimately reducing the costs of production.

Medical products that utilize microextrusion technology overwhelmingly support cardio-and-neurovascular procedures, drug delivery, IV procedures, and other procedures that require work on a micro level.

By minimizing the impact of invasive procedures, the medical industry can reduce complications, make procedures faster and more efficient, and ultimately reduce patient in-time and overall healthcare costs.

WHAT’S THE MICROEXTRUSION PROCESS LIKE?

Manufacturing the miniature components used in a medical microextrusion device poses a unique challenge for microextrusion providers. These components cannot be created using conventional extrusion machinery. Instead, they require precise, state-of-the-art equipment that allows for a high degree of precision and control over the process, as well as Engineers and technicians that possess deep knowledge of both the material and the process itself.

However, at its core, the process is similar to that of regular extrusion.

The material is either pushed forward (direct) or pulled through (indirect) a die orifice to create the shape required. Unlike macro-level extrusions, microextrusions are extruded at a very slow rate to maintain the physical properties of materials that are often delicate.

Done properly, microextrusions can create end products that have complex cross sections and preserved chemical properties.

BENEFITS TO OEMs

Lower Time-to-Market

In years previous, OEM’s requests for medical products would require them to re-outfit their existing extrusion machines, which would take more time and far less efficient. With many manufacturers outfitting themselves with microextrusion machinery, the time required to create the product is drastically reduced.

Lower Costs

As stated above, microextrusions can achieve their desired performance at fractions of the cost, due to the lower cost in materials that are used. As the development of the technology continues to improve, so to do the devices that are used in tandem with them. (i.e fibre optic cable, sensors, stints, etc.)

Psychological benefit to patients

A patient’s positive mental state can be a great asset to their recovery. Waning are the days of large, invasive medical devices that can cause patients discomfort. Smaller, less intrusive devices can go a long way. (source: Medical Plastic News)

POTENTIAL APPLICATIONS

  • Infant/paediatric care
  • Heart leads
  • Neurological
  • Vascular Surgery
  • Catheters
  • Radiology
  • Urology
  • Oncology

About Taber Extrusions

Founded in 1973, Taber Extrusions originally pioneered a process for extruding rectangular billet which enables the company to extrude solid profiles up to 31 inches wide or hollows up to 29 inches. Taber expanded with the purchase of an extrusion facility in Gulfport, MS in 1995 which houses a new state of the art cast house, two additional presses, and a fabrication area that has been expanded multiple times. Taber continues to extrude billet in a wide range of alloys. and sizes.

Taber Extrusions has recently purchased the Exact Manufacturing division of Lou-Rich, Inc. which will now expand Taber’s capabilities to include ultra-precision aluminum extrusions®.

Today, Taber Extrusions is proud to announce expanded capabilities to include aluminum ultra-precision extrusions®.

Follow Taber Extrusions

LINKEDIN: https://www.linkedin.com/company/8843183/

FACEBOOK: https://www.facebook.com/taberextrusions/

TWITTER: https://twitter.com/taberextrusions

Interested in becoming a part of the Taber Team?  Submit your resume to careers@taberextrusions.com.

Go to Top